An overhead system is easily installed in an existing or new building. A single drop is normally located at the side of the stall approximately 1' behind rear vehicle bumper, The ductwork should be at an elevation of 15' to 16' A.F.F., which would then allow the standard 20' hose drop to attach to either right or left side mounted tailpipes. An overhead drop is installed by slipping the overhead coupler over the appropriate size stub or air flow "T" of the ductwork. The overhead coupler is held in place with a bolt through the assembly. FOR DUAL EXHAUST VEHICLES A "Y" HARNESS SHOULD BE USED IN CONJUCTION WITH THE OVERHEAD DROP. Various types of pull-up sets are availavle to retract hose drops when not in use, such as Harvey's No. 1, 2, or 3 Skyhooks.

ALL HARVEY PRODUCTS "MADE IN THE U.S.A.